Connect your robot to the network

How to connect your robot to the network (full/starter kit only).

Hard-wired connection

For Full/Starter kit only:

Use an ethernet cable to connect your robot to the network. The ethernet plug is available at position (b) on Reachy’s hardware interface.
The computer inside Reachy is configured to use DHCP. It should thus be directly accessible on your network.

WiFi

For Full/Starter kit only:

Reachy is equipped with a Wi-Fi module! You can then directly connect Reachy to your network wirelessly.
Note: if you are connected to Reachy remotely and depending on your use, we advise to favor an ethernet connection to benefit from a more stable connection.

Edit this page on GitHub